How do I Calibrate a MC9090?

FAQ: What Is the Key Sequence to Launch the Calibration Screen on the MC9090? SUMMARY

APPLIES TO MC9090

Security Level Public

Article ID MCD-01516 Last Reviewed 05-02-2007 Revision 0.1

SUMMARY: To launch the calibration screen on an MC9090 running Windows Mobile 5.0, press the function and escape keys simultaneously. To calibrate the MC9090 touch screen tap the center of each target as it appears. Several targets will appear one after the other, until the screen is calibrated.

3 thoughts on “How do I Calibrate a MC9090?”

  1. MOTOROLA SYMBOL MC9090 WINDOWS CE 5.0
    how to skip and permanently save touch calibration after cold boot??

    Maybe something like this:
    [HKEY_CURRENT_USER\Software\Symbol\StartUp]
    “SkipCalibrate”=dword:00000000
    Save the file as skipcalibrate.reg.
    Place this registry file into the \application folder

    But where we can place Touch Calibration Value??

    Anyone can help me?

    Very Thanks
    Best Regards
    Andrea

  2. This question is really outside the scope of Eclipse Technical support and our area of expertise. What I would recommend you do is contact Motarolla at 800-653-5350.

    If the gun has a service agreement on it they would be able to assist with this type of a question.

    Regards,
    Bryan

  3. This is the answer from Motorola

    [HKEY_LOCAL_MACHINEDriversBuiltInTouch]
    \InitialState\=dword:4 ; 0=D0=enabled, 4=D4=disabled
    Может еще понадобиться вот это

    [HKEY_LOCAL_MACHINEHARDWAREDEVICEMAPTOUCH]
    \CalibrationData\=\514,527 270,760 772,751 764,287 263,287 \

Comments are closed.